Home » Modellen » Boscarrelli 400 » Boscarrelli 400 Fly PIZZA
The Pizza Piaggio !! We are converting the Piaggio Ape Classic into a professional pizza bakery. Equipped with a sturdy double-bearing stainless steel drawer with hard stone worktop. The custom-made fridge is equipped with rails to store a total of 12 pizza bun bins. This version is available from €21.500 excluding VAT
Motor Single cylinder 4-stroke diesel engine
Max Power 6,20 Nm at 3.600 tpm
Engine size 435cc
Max. Speed 45km/u
Dimensions L3.20 x H1.95 x W1.50
The following products are included in the pizza version
The huge pull-out tray with stone worktop, especially for preparing your pizza. With space for 2 GN containers under the worktop and 3x 1 / 3GN container next to the worktop. We also offer the option to attach a garnish unit
220V sockets, 2 under the worktop with 1 fuse box of 1x 16Amp. We install the plug connection under the vehicle
This custom-made refrigerator is designed to carry as many pizza balls as possible
Hatch in the right side under the worktop (60cm x 35cm) Optional: we can mount an extendable sink behind this
We make a realistic 3D design of the Boscarrelli with your chosen layout and options
We can also build in the options below. This is just a selection of the many possibilities
Lighting
You can choose between lighting in different places; in the ceiling of the structure. in the left and right wing or a combination of both. Of course your ideas are also welcome
Coolingdrawer black or white, 30L
12/24v DC, energy efficient compressor refrigerator drawer. Temperature can be set to -2C
Extra drawer with stone worktop +/- 40x120cm
Extra extendable drawer with stone or stainless steel worktop, to be used as a distribution counter. +/- 40x120cm
Large stainless steel / Inox drawer 44x30cm
Drawer dimensions: 44x30x46cm WxHxD
Stainless steel (cash) drawer
Dimensions inside drawer: W32xH11xD37cm. Drawer is also available as a cash register drawer with lock or knock-off drawer
Custom made stainless steel container
We make a stainless steel container for your tools etc.
Pizza oven 80x60 (wood fired)
Wood-fired pizza oven, nice quality oven of 98x78cm, big enough for 4 Pizzas. Baking space 80x60cm. Baking temperature max. 550 ° C. Also available in gas version
Pizza oven 80x80 (woodfired)
Wood-fired pizza oven, nice quality oven of 98 (W) x105cm (D), Baking space 80x80cm big enough for 6 Pizzas. Baking temperature max 550 ° C. Also available in gas version
Chimney hatch
Hatch for covering the chimney hole
Chimney made to measure
Chimney of partially insulated pipe and rain hood made to measure
Electric 4x Pizza oven 35x40cm 350 degrees
Features 2x 3.45 kW / 230 V / 50 Hz: Four separate baking chambers Top and bottom heat can be controlled separately Illuminated baking chambers with glass door Stainless steel housing Temperature up to 350 ° C Heat-resistant stone plate 4 Thermostats External dimensions: (W) 52 - (D) 54 - (H) 72 cm Inside dimensions: (W) 2x 35 - (D) 40 - (H) 7 cm Weight: approx. 50 kg
Electric double Pizza oven 40x40cm 350 degrees
Properties 2.5kW / 230 V / 50 Hz: Two separate baking chambers Top and bottom heat can be controlled separately Illuminated baking chambers with glass door Stainless steel housing Temperature up to 350 ° C Heat-resistant stone plate 4 Thermostats External dimensions: (W) 56 - (D) 56 - (H) 44cm Inner dimensions: (W) 40 - (D) 40 - (H) 12 cm Weight: approx. 50 kg
Electric double Pizza oven 66x66cm 500 degrees
Properties: 9.4kW / 400V / 50 Hz: 2 separate baking chambers Top and bottom heat can be controlled separately Illuminated baking chambers with glass door Stainless steel housing Temperature up to 500 ° C Heat-resistant stone plate 2 Thermostats External dimensions: (W) 98 - (D) 93 - (H) 75 cm Inner dimensions: (W) 66 - (D) 66 - (H) 14 cm
Weld-on hinge (suspension point for e.g. table)
Stainless steel welded hinge which is welded to the frame during construction. Hinge can also be used for eg Beach flags or a Display
Side "hang" table
Side "hanging" table in stainless steel, this can be attached to a corner of the worktop by means of a weld-on hinge. Up to 4 are possible
Rack for weld-on hinge
Rack which can be hung on a welded hinge
300L fridge to Freezer upgrade
We convert the refrigerator into a freezer. The stainless steel doors are fitted with heating ribbons and we install a freezer cooling system with a capacity of 270w
Partition wall on worktop
We build a partition wall on the middle of the worktop
Garnishing unit for 6 containers
We make this garnish unit, which is suitable for 6x 1/6 GN containers of 15 cm deep, suitable for mounting on the extendable pizza work table
Fridge with glass door and lighting
Fridge 50L with glass door. 64x43x48cm (HxWxD)
White tire set of 3 pieces
To give your Ape that old look
Wheelrims in color
Powder coated rims in RAL color of your choice
Roof rack on cabin
We mount this roof rack on the roof of the cabin. if necessary, we can also make it in the color of the body
Roof rack on cabin, Wood
The roof rack is fitted with wooden slats, for an even more original look
Roof rack on sales unit with wooden elements
Roof rack on sales unit with wooden elements
Extendable stainless steel / Inox sink with tap
Extendable stainless steel / Inox sink with tap
Water tank 14L + pump and accessories
Water tank 14L + pump and accessories
Waste water tank under the vehicle, removable
With this facility, the waste water is collected
Hot water boiler 5 liters
With this 5 liter water boiler you are provided with hot water. Works on 220v and therefore does not work in combination with gas
100 Amp Semi-traction Battery + 10Amp Battery Charger
For when you want to be able to use the lamps and fridges when there is no power available
Gas tank adjustment in loading floor for gas bottle
Gas tank under the floor for mounting a 40 cm high gas bottle
Power connections 380V / 32A Amp fuse box
380V connection, Sockets 2 above and 4 below the worktop with 1 fuse box for 380V - 32A
Gastank polyester Bennegas
Gas tank polyester Bennegas, lightweight and transparent so you can see how much gas is in it
Longer version 2m
Instead of the standard construction of 177cm, we make a construction of 200cm long
Chrome moldings and chrome mirrors
We replace the standard gray headlight edges with chrome. We also replace the black mirrors with chrome and finally we mount beautiful chrome frames
Front fenders like Calessino
We fit new mudguards with a classic look. Please note: if you choose this, the entire underside of the front must be repainted. this because of other mounting holes
Spray front underside
In order to be able to mount the chrome headlights and new fenders, we have to seal some holes and remove supports. After this we paint the underside of the cab front again in the color. If you choose to repaint the entire vehicle, these costs will be waived
Cooling drawer with stainless steel front
For a more chic look, we mount a stainless steel front
Drawers spray in RAL color
The different drawers can be painted in any desired RAL color
Pizza Fridge + color door
If the standard stainless steel color does not meet your requirements, order your refrigerator in a RAL color of your choice
Garnishing unit powder coating in RAL color
If the standard stainless steel color does not meet your requirements, have the garnishing unit powder coated in a RAL color as desired
Gas tank adjustment in RAL color
Gas tank adjustment in any desired RAL color
Inside wing doors in a different color
We can make the inside of the Polyester wings in a different RAL color than the outside
Design with logo etc.
We can label your Boscarrelli however you would like. This in consultation with our advertising agency
Windshield on wing door
We are making a windshield on the wing side and front. So that your drawer is out of the wind or rain
The Ape Classic is available in 2 different colors
The Ape Classic is available as standard in the colors white and blue. One desired RAL color can be chosen for the construction, this color is included in the standard price. If multiple colors have to be used, an additional cost will be charged
Chassis/ cabin exterior spray painting in RAL color
Chassis / cabin interior and exterior spray painting in RAL color
Chassis / cabin interior and exterior spray painting in RAL color
We not only spray the outside in a desired RAL color, but can also spray the entire inside of the cabin
Complete vehicle refinishing in two tone or metallic color
The complete Piaggio can be painted in a metallic color or multiple colors can be used and color accents can be applied